FAQ
Most frequent questions and answers
Step 1: Go to the lAPMO R&T official website pld.iapmo.org
Step 2: Select “Listee Name” and enter “AQUAZON’ for searching.
Step 3: Find this model “CRF-950Z” in the listed projects.
Step 1: Shake the filter gently until you hear the granules shifting inside.
Step 2: Soak the filter in cold water for 15 minutes to remove every air bubble.
Step 3: Flush the filter with cold water for 10 seconds.
Step 4: Put the filter into the tray and twist the filter clock-wise to lock the filter into place.
Please note that Pur filter cannot reduce TDS.
Our filter obviously cannot lower the TDS value because it uses natural coconut shell activated carbon that can filter harmful substances while keeping beneficial minerals such as potassium, calcium, etc.
No.
Our filter is designed for Municipal Tap Cold Water. If using well water, please make sure the feed water has been through a pre-filtration system. Otherwise, large particles in well water will clog the filter easily and shorten filter life.
The new filter should be flushed with cold water for at least 10 seconds before use. The filter is made from coconut shell activated carbon block, and harmless charcoal residuals and fines can be found in the new filter. The flush process will remove them.
Yes, you must replace the filter every two months or sooner. Filter’s 40-gallon life depends entirely on your local water quality and frequency of
use. Failing to replace the filter will cause a reduced water flow or sediment/rust present in the water.
