Step 1: Go to lAPMO R&T’s Product Listing Directory https://info.nsf.org/Certified/dwtu/
Step 2: Select search category: Listed Model/Additional Company
Step 3: Enter “PP-RWF2300A” in the brand name/model field

Installation Steps
1.Pull the old filter straight down and discard
2. Place the new filter in the filter cup, and keep the O-ring of the filter cup in its place.
3. Push the filter/filter cup assembly into the filter head
4. Twist assembly clockwise to tighten into housing.
5. Run wate  from the dispenser (about 3 gallons or 5 minutes) to clear the system, prevent sputtering, and condition the new filter.
6. On models with a replacement indicator light, press and hold the RESET WATER FILTER PAD above the dispenser for 3 seconds

Please follow the following troubleshooting methods:
1) Air accumulation inside the filter. Please shake the filter 2-3 times before reinstalling it to check if it continues working.
2) The second used filter is not installed in place, and the water valve at the junction of the filter head and the refrigerator fails to open. Please ensure the filter is installed in its place.

Yes. They help remove chlorine, bad taste, and other harmful contaminants from your water, protecting your health and improving the taste and smell of your water and ice.