Step 1: Go to lAPMO R&T’s Product Listing Directory https://info.nsf.org/Certified/dwtu/
Step 2: Select search category: Listed Model/Additional Company
Step 3: Enter “PP-RFC6600A” in the brand name/model field

Installation Instructions
The water filter is located in the base grille below the freezer compartment door. It is not necessary to remove the base grille to remove the filter.
1. Remove the filter by pressing the eject button and pulling straight out on the filter cap.
NOTES:
Avoid twisting the cap when removing the filter because this could cause the cap to come off. If this occurs, replace the cap and pull the filter straight out..There will be water in the filter. Some spilling may occur.
2. Remove the cap by turning it counterclockwise until it stops.IMPORTANT: Do not discard the cap. lt is part of your refrigerator. Keep the cap to use with the replacement filter.
3. Place the cap (removed in Step 2) on the new filter. Turn the cap clockwise until it snaps into place.
5. Push the new filter into the opening in the base grille. As the filter is inserted, the eject button will depress.
The eject button will pop back out when the filter is fully engaged.
6. Pull gently on the cap to check that the filter is securely in place.
NOTE: Flush the water system before ejecting a newly installed filter to clear air from the lines and filter.

The majority of the refrigerators need a manual reset. Please press and hold the indicator light/filter for 3 seconds to reset the system. Please refer to your user manual.

The new filter should be flushed for 3 gallons or 5 minutes to condition it. The water filter is made from coconut shellactivated carbon block, ess harmless charcoal residuals and fines can be found in the new filter, The flush processwill remove carbon fines out of the system.